Custom knives with your company logo: every part you can change
Most buyers who contact us start with the same three questions. Can you change the blade steel on one of your models? Can you add something, such as a lanyard hole? Can you put our logo on the blade? The answer to all three is yes. This guide goes through every part of a knife we can change for your brand, so you can plan a custom order before you send an enquiry.

Start from one of our models, or from your own design
There are two ways to order a custom knife. The quicker one is to take an existing TEK model and change the parts you want: steel, finish, handle, colour, logo and packaging. The tooling for that knife already exists, which keeps cost and lead time down. The other is to send us your own design as a drawing, a rendering or a sample, and we engineer and prototype it. Our post on how a custom folding knife is made covers that second route.
Blade steel
Steels we work with include 420J2, 440C, AUS8, D2, VG10 and Damascus. The choice is a balance of edge retention, rust resistance, ease of sharpening and price. 420J2 is affordable and very rust resistant. AUS8 is a good all-round steel for pocket and tactical knives. D2 holds an edge longer but needs a little more care against rust. Our blade steel guide compares them in detail.
Blade shape and tip
The tip profiles are drop point, clip point, tanto, spear point and trailing point. A drop point is the most versatile general-purpose shape. A tanto has a strong, angular tip that suits tactical knives. A clip point gives a finer tip for detailed cuts, and a trailing point sweeps upwards for long slicing cuts, which is why skinning knives use it.
Cutting edge
The edge can be plain, serrated or single bevel, and hunting models can take a gut hook. A plain edge is easiest to sharpen and gives the cleanest cut. Serrations bite into rope, webbing and other fibrous material. Many buyers choose a combination: plain near the tip, serrated near the handle.
Blade finish
Finish changes the look of a blade and how it wears. Satin is a fine brushed finish that shows off the steel. Tumbled and stonewashed finishes have a matt, textured look that hides the scratches of daily use. Bead blasting gives an even, non-reflective grey. A black TiNi coating gives a dark blade with extra protection against rust.
Handle material and colour
Handles can be wood, aluminium, stainless steel, titanium, G10 or brass. G10 is a glass-fibre laminate that is light, strong and grippy even when wet, which is why it's the usual choice for tactical and EDC knives. Aluminium and titanium give a metal look at low weight. Wood and brass suit traditional and gift knives. Standard handle colours include black, tan and olive drab, and multi-colour handles are possible.

Your logo
Logos can be laser engraved, stamped or printed. Laser engraving is crisp and permanent and works on blades, metal handles and clips. Stamping presses the logo into the steel. Printing suits colour logos on handles and on the box. Tell us where you want the logo (blade, handle, clip or packaging) and we'll suggest the best method for each spot.
Extra functions
We can add a glass breaker, a hammer, a screwdriver or a lanyard hole. Extra functions change the shape of the knife and sometimes its tooling, so our designer goes through each request with you before we quote.
Packaging
A custom knife usually needs its own packaging. Our standard pack is a poly bag in a printed box, and blister packs, display boxes and gift boxes are all available. See knife packaging options for the details.
How a custom order runs
- Send us the model you like, or your own design, and the changes you want.
- We confirm the details and make a sample.
- You approve the sample.
- Production typically takes 45 to 60 days after approval.
- We pack the knives and ship them FOB Taiwan by sea, or by air freight or courier.
Minimum order quantities depend on the model and on how much you change, so ask us for current minimums when you send your enquiry.
Related models
3.95" stonewash plain blade, Japanese AUS8, 4.94" machined coyote G10 handle, liner lock knife 218View model
2.81" Stonewash AUS8 blade stainless steel pocket knife 800View model
Titanium grey folding pocket knife 808View modelQuestions
Can I put my company logo on a knife?
Yes. Logos can be laser engraved, stamped or printed on the blade, handle, clip or packaging.
Can I change the blade steel on one of your existing models?
Yes. Steels include 420J2, 440C, AUS8, D2, VG10 and Damascus. Changing the steel or finish on an existing model is quicker than a new design because the tooling already exists.
How long does a custom knife order take?
Production typically takes 45 to 60 days after you approve the sample.
More from the blog
How a custom folding knife is made, from 3D design to prototypeFrom your brief to a 3D model, a handmade prototype and an approved sample, with video from our workshop.
What is the detent on a knife? Liner lock detent balls explainedThe small steel ball that keeps a folding knife shut: how it works, why tension matters, and how we set it.
Knife packaging for your brand: boxes, blister packs and gift boxesHow we pack knives for export, and the box, blister, display and gift packaging you can choose for your brand.

